Ezrider_92356
Chief Petty Officer
- Joined
- Jul 14, 2007
- Messages
- 426
im having a hard time wetting out my woven roving. i think its 24 oz cloth if i remember right. well anywhaz my method so far has been to first wet the area im applying the cloth too lay my pre cut peice over the top of the area and then use a dry paint brush or roller to push the cloth into the resin and then add additional resin to the top side pushing it into the fabric to get it wet out. but its not easy takes a long time, and when i try adding resin and working the top of the cloth with a roller it ends up grabbing the cloth on the back side and eather the cloth moves or lifts. it takes me so long that my resin starts to cure while im still trying to get all the air out. and im already using half the recommended amount of hardener to slow the curing process. and iv been working on it early in the morning when temps are the coolest to help slow it down as well. anyone have any sujestions. and my tequnece worked great for the matt but this woven is just so hard to get fully weted out.