Leaky Rear
Seaman
- Joined
- Aug 31, 2017
- Messages
- 66
My earlier posts disappeared. Or I can not find them, excuse I am asking twice the same info. Been a while that I have time to work on the boat.
I am needing a new impeller , and water pump rebuild kit for Volvo Penta 305 . Can I rebuild the bearing myself ?
I remember being told if I take the bearing apart if the shaft is grooved then need to replace pump as a whole.
Looks like the shaft needs to be pounded thru the pulley to get bearing out. How hard is that metal , will tolerate get er done type removal?
There was mention on an older post that a bearing rebuild kit includes an impeller.
I am needing a new impeller , and water pump rebuild kit for Volvo Penta 305 . Can I rebuild the bearing myself ?
I remember being told if I take the bearing apart if the shaft is grooved then need to replace pump as a whole.
Looks like the shaft needs to be pounded thru the pulley to get bearing out. How hard is that metal , will tolerate get er done type removal?
There was mention on an older post that a bearing rebuild kit includes an impeller.