Volvo penta 4.3 2006 fuel rail injector socket detached

fran67

Recruit
Joined
Jun 11, 2023
Messages
2
Hi All,
The socket of one of the injectors in my 4.3 Penta GXI-E detached from the fuel rail.
Dealer prince is over 1200 US dollars for the whole rail.
Looking for alternatives
knowing this is a fuel high pressure need some strength to hold.
Can this be welded or somehow re-attached to the rail with something?
I found a very similar on Ebay with a different part number and advertised for engines 2007 and up, by any chance anyone know if those can be exchanged?

Thank you
Frank
2006 Regal 2860 Window Express
Volvo Penta GXI-E 4.3L (x2)
 

fran67

Recruit
Joined
Jun 11, 2023
Messages
2
Thank you for reply but no, not the retainer, i am talking about the actual piece welded to the rail that holds the injector and retainer to the rail.
From the same graphic the nipple protruding on the lower side of the rail and where the injector seat.

Thank you
Frank
2006 Regal 2860 Window Express
Volvo Penta GXI-E 4.3L (x2)
 

Attachments

  • nipple.jpg
    nipple.jpg
    12.6 KB · Views: 0

ESGWheel

Chief Petty Officer
Joined
Aug 29, 2015
Messages
469
There are boat ‘salvage yards’ that may be able to get you a used one. I looked on eBay as well and a too good to be true popped up for a 4.3, not sure it’s the proper fit but worth checking. Here is the link.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,574
The fuel rail is a GM part.

However a good tig welder can weld the cup back on
 

Fun Times

Moderator
Staff member
Joined
May 16, 2009
Messages
9,048

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,574
GM 12609190

interchange numbers 12568878, 888775T, 879312003, 12609192

here is one for under $100


here is one for about $50 https://www.ebay.com/itm/144380439774
 

dypcdiver

Lieutenant Junior Grade
Joined
Nov 1, 2005
Messages
1,039
I am sure they are not welded on but silver soldered. An easy fix for a half decent welding shop.
 
Top