deerhuntre
Petty Officer 2nd Class
- Joined
- Apr 26, 2007
- Messages
- 186
I am not able to get the primer bulb to firm up. I pump and pump and I hear noise like squeaking or bubbles in it. The bulb almost feels like its having a lot of trouble filling up, as if the fuel line is constricted. Also, after a squeeze, it returns to the original shape very, very slowly.
Troubleshooting:
I've installed a new complete fuel line assembly with a new bulb and have the same problem. Then I disconnected the line from the tank outlet and connected same to an external tank. Same problem.
Next I thought I'd look at the line to motor connector, but I'm not sure what else to look at from here.
Engine: 1986 I6 115
Tank: Kracor tank, Model 6-7015, 24 Gal
Fuel line assembly from Bass Pro, Tempo Brand, (I think, but not sure, cause I'm at work and this has been bugging me enough to post now and not wait until I get home later)
Full tank of gas
Please let me know what else I can provide.
Troubleshooting:
I've installed a new complete fuel line assembly with a new bulb and have the same problem. Then I disconnected the line from the tank outlet and connected same to an external tank. Same problem.
Next I thought I'd look at the line to motor connector, but I'm not sure what else to look at from here.
Engine: 1986 I6 115
Tank: Kracor tank, Model 6-7015, 24 Gal
Fuel line assembly from Bass Pro, Tempo Brand, (I think, but not sure, cause I'm at work and this has been bugging me enough to post now and not wait until I get home later)
Full tank of gas
Please let me know what else I can provide.