Trim

[Scott Danforth]

Is there a video out there that helps take out a stinger 800 outdrive?

See post 15

 

[Maverickfe]

To remove the out drive on the back of the motor and all the screws in the picture?

 

[Scott Danforth]

No.... see post 15

see the vids if you dont get a factory manual

pull the esa cover, disconnect the shift cable, fish the lower shift cable out the back, remove the trunion caps and pull the drive

to pull your motor, you would pull the screws in the transom, take the transom ring off and push the boot thru to the inside and then take the motor and intermediate out as a whole unit.

 

[Maverickfe]

I can do this with it down ? I have the cable disconnected for inside now.

 

[Scott Danforth]

yes

and here is the link to the videos

http://sterndrive.info/

 

[Maverickfe]

thanks are there bolts under the adapter?

 

[Maverickfe]

Well i got it loosen but the cable is holding me up any thoughs?

 

[Scott Danforth]

There should be a clip holding the cable under the intermediate near the ball gears

Dont damage that cable, its 3/4 of a B.O.A.T. unit

 

[Maverickfe]

Is it like the ones on the other end that will not go through tha hole

 

[Maverickfe]

The one end that's in the boat has a brass block on it you can see it in the picture

 

[Maverickfe]

Just want to say thank you for the help Scott just to let you know my name is Scott to lol