Hi
Thanks Riptorn, i got your message despite the original thready being closed, nt sure why it was closed???
Anyway i fitted a new plug NGKB6HS and it was running ok (i have since been recommended to use a B8HS and i have this on order as original Tomos plug was Bosna F80 so in the same heat range as NGK B8HS)
I had engine running well in the tank as before but now suddenly i had issues where i could not start it at all. After some checking and double checking i found it was my "adaptor" to allow my Tomos 6mm fuel coupling to fit the new fuel hose that is 8mm, long story short i bodged it and this caused a fuel stoppage
I now have a proper 8mm-6mm hose joiner on order with the plug as well as having the Tomos fuel coupling on a 6mm piece of fuel line that will be properly joined to the 8mm line from the external tank.
Hope to test again next weekend with freshly mixed fuel, will report back.
Best regards
Kevin
Thanks Riptorn, i got your message despite the original thready being closed, nt sure why it was closed???
Anyway i fitted a new plug NGKB6HS and it was running ok (i have since been recommended to use a B8HS and i have this on order as original Tomos plug was Bosna F80 so in the same heat range as NGK B8HS)
I had engine running well in the tank as before but now suddenly i had issues where i could not start it at all. After some checking and double checking i found it was my "adaptor" to allow my Tomos 6mm fuel coupling to fit the new fuel hose that is 8mm, long story short i bodged it and this caused a fuel stoppage
I now have a proper 8mm-6mm hose joiner on order with the plug as well as having the Tomos fuel coupling on a 6mm piece of fuel line that will be properly joined to the 8mm line from the external tank.
Hope to test again next weekend with freshly mixed fuel, will report back.
Best regards
Kevin