The wonderful one click starting noise

skc0101

Recruit
Thread starter
Joined
Jul 4, 2011
Messages
3
I'm new to the boating world. Just picked up my first boat last year. Got to use it once last year, but started it every other week with the muffs on. Never had an issue with starting. I took the boat to get winterized by a mechanic. Then Spring came, I know the batteries are good and fully charged. Hooked the muffs on and all I got was a click from the slave/assist solenoid. I found a great article on the site how to to test everything and followed it all step by step. I found out that my two top terminals are wired different than the diagram on the site. From what I read Terminal B should be yellow with no power I think, Terminal A should be red with power (the battery), but on mine right now Terminal B has power and A does not. I want to do the jump test with bypassing the slave, not tapping A&B together. So I guess my main question would be, what would happen if terminal A&B were backwards? and if they are correct, would anything happen if I switched them?

I appreciate any feedback as my family and I are very anxious to get out with the boat soon.
 

skc0101

Recruit
Thread starter
Joined
Jul 4, 2011
Messages
3
Re: The wonderful one click starting noise

Just I little more additional info. It's 86 Mercruiser 260 V8 I/O
 

Fireman431

Rear Admiral
Joined
Sep 17, 2007
Messages
4,292
Re: The wonderful one click starting noise

If it started just fine before, and no one has messed with the starter terminals, why would it not start now? Has anyone messed with the wiring? Did you talk to the mechanic? It's possible your started is just locked up from sitting after winterizing. You can try bypassing the solenoid, or tapping on the starter gently to see if it engages, or remove it and have it bench tested. Verify the batteries are fully charged.
 

skc0101

Recruit
Thread starter
Joined
Jul 4, 2011
Messages
3
Re: The wonderful one click starting noise

Nothing was messed with after it was winterized. All I did was transport it home and disconnected the batteries. Now that I'm thinking about it, I might remove the starter and clean the terminals, if I seem to remember they might have been rusted plus I can run the bench test. I feel bad cause we're almost 1/2 way through the season already and it's sitting in the driveway still.
 

Pierutrus

Senior Chief Petty Officer
Joined
Mar 25, 2007
Messages
721
Re: The wonderful one click starting noise

Time to get busy before you find yourself coming up on Labor Day!:eek:
 

Lakemeadan

Petty Officer 2nd Class
Joined
May 25, 2010
Messages
123
Re: The wonderful one click starting noise

If you are getting a solid loud click at the starter solenoid than you probably need a starter. I'll do a few things real quick with meter for full voltage/connection/amp first at solenoid. Sometimes tapping starter where it engages into flywheel housing helps engage it or turning engine over a little. If its an old starter and easy to get to just pull and inspect both gears starter/flywheel and bench check. Even if the starter bench checks ok but contacts/gear/ parts looks like most of its life is near end I'm putting a new one in and it will not be a rebuilt/or reman on my boat. Hope I helped you, do what you can afford.
 
Top