Teleflex 6-pin "Deutsch" configuration

[darmandude]

Anyone got the documentation that came with these Teleflex gauges?

TACH #100602 362/02

SPEEDOMETER #100590 100/03

FUEL #100583 353/02

VOLTS #100610 104/03

OIL PRESSURE #100586 273/02

WATER TEMP #100611 104/03

I need the 6-pin configuration for them. I've tried to reach Teleflex but no luck. Thought I'd try you guys.

 

[EricJRW]

Re: Teleflex 6-pin "Deutsch" configuration

You may have found these already, but just in case...

Try browsing here for your part numbers:

http://www.teleflexmorse-eu.com/library/instructionmanuals/

PS. I did a quick search and found this:

http://www.outboardrepairs.com/topics/009745.html

The link for http://www.tflx.com/PDF/99320.pdf does not work, but a Google search on "99320.pdf" turned up that location, which looks promising (if all else fails).

PS. Might be some good links here too:

http://continuouswave.com/ubb/Forum6/HTML/000908.html

 

[darmandude]

Re: Teleflex 6-pin "Deutsch" configuration

Yea, I seen those already. Nothing about 6-pin Deutsch configuration.

 

[EricJRW]

Re: Teleflex 6-pin "Deutsch" configuration

Oh well, it was worth a shot.

The other idea is that if you got a hold of one harness, you could reverse engineer it... Would be even easier if they followed standard marine color conventions for wiring.

Since most gauges have 4 wires in common (+12V, ground, lights, and the input from the sender to the gauge), you could figure out the first 3 pretty easily and that leaves just the signal from the sender.