What adhesive is used to install new stainless cap in new housing
P Possum1204 Recruit Joined Mar 20, 2021 Messages 2 Mar 20, 2021 #1 What adhesive is used to install new stainless cap in new housing
Sea Rider Supreme Mariner Joined Sep 20, 2008 Messages 12,345 Mar 21, 2021 #2 Welcome to Iboats, Water pump's caps (liners) are usually pressed in inside the housing, no adhesive required unless factory stated ? Happy Boating
Welcome to Iboats, Water pump's caps (liners) are usually pressed in inside the housing, no adhesive required unless factory stated ? Happy Boating
P Possum1204 Recruit Joined Mar 20, 2021 Messages 2 Mar 23, 2021 #3 Actually found out that have to use silicone to hold in the housing on Suzuki df motors. cap does not press in. thanks for your input though, learned something new.
Actually found out that have to use silicone to hold in the housing on Suzuki df motors. cap does not press in. thanks for your input though, learned something new.
R raczekp1 Lieutenant Joined Mar 30, 2010 Messages 1,327 Mar 23, 2021 #4 ther should be a "hook" on upper side of linear to hold in place into housing
Sea Rider Supreme Mariner Joined Sep 20, 2008 Messages 12,345 Mar 23, 2021 #5 Suzuki liners and water pumps housing must be one of a kind, with the pressed ones will find that sometimes are hard to remove. Happy Boating
Suzuki liners and water pumps housing must be one of a kind, with the pressed ones will find that sometimes are hard to remove. Happy Boating
