summer prep.

[Little niangua]

I have this 125 hp force engine built under Chrysler ownership 1984 model. I am used to seeing two similar sized oil service ports on the lower unit. On this engine I see the two similar sized ports up high and a smaller screw down low where the drain and fill plug should be. The last time I pulled a small screw plug down low it was a pin holding something in place. Never did get it back in. Please... the drain refill proceedure for the lower unit oil. thanks.<br />Little Nianagua

 

[jasonbailey]

Re: summer prep.

My L/U has a screw on the very bottom of the L/U that is the same size/shape has the filler and vent screws. That is the drain. DO NOT TAKE the smaller screw up near the front on the side. If you do you will be very very sorry.

 

[jasonbailey]

Re: summer prep.

My L/U has a screw on the very bottom of the L/U that is the same size/shape has the filler and vent screws. That is the drain. DO NOT TAKE the smaller screw up near the front on the side. If you do you will be very very sorry.