Struggling

awilson07

Cadet
Joined
Jan 25, 2021
Messages
9
I finally have most of the boat cleaned out (well to where I’m satisfied enough) but I’m having a heck of a time getting the old foam and wood out from behind the two back corners. Any suggestions?? Please and Thankyou in advance. Here’s a few pictures of the whole thing.
 

Attachments

  • 97261B5D-2041-4DD4-B689-80D8F7988F33.jpeg
    97261B5D-2041-4DD4-B689-80D8F7988F33.jpeg
    3.8 MB · Views: 30
  • D64F2C63-DE40-440B-8830-B405D63F2083.jpeg
    D64F2C63-DE40-440B-8830-B405D63F2083.jpeg
    3.2 MB · Views: 29
  • 479EFE46-6FEB-4E30-9F5E-BD83673260F1.jpeg
    479EFE46-6FEB-4E30-9F5E-BD83673260F1.jpeg
    3.6 MB · Views: 26
  • 4FD18CFE-64FB-4BA0-BF09-154B1006B584.jpeg
    4FD18CFE-64FB-4BA0-BF09-154B1006B584.jpeg
    5.1 MB · Views: 28
  • 8EBDD34B-195F-457D-B55D-17A4E208C199.jpeg
    8EBDD34B-195F-457D-B55D-17A4E208C199.jpeg
    2.9 MB · Views: 24
  • D697E88C-6896-460E-9E62-F3AB03CD4138.jpeg
    D697E88C-6896-460E-9E62-F3AB03CD4138.jpeg
    4 MB · Views: 24
  • AB60499A-7557-4D5D-9A9F-9FD780D716EA.jpeg
    AB60499A-7557-4D5D-9A9F-9FD780D716EA.jpeg
    4.3 MB · Views: 24
  • 3871F384-714C-4C3C-9FA2-8E3AF3DF4468.jpeg
    3871F384-714C-4C3C-9FA2-8E3AF3DF4468.jpeg
    2.2 MB · Views: 24
  • 16C7BDD9-DE65-4886-A861-D35A8FE966FC.jpeg
    16C7BDD9-DE65-4886-A861-D35A8FE966FC.jpeg
    3.1 MB · Views: 24
  • E3261CDF-8CD0-4DCF-AE29-0A4C28752A20.jpeg
    E3261CDF-8CD0-4DCF-AE29-0A4C28752A20.jpeg
    2.7 MB · Views: 25
  • AAF8D6E2-C34C-4E75-8DE5-EC6424F63334.jpeg
    AAF8D6E2-C34C-4E75-8DE5-EC6424F63334.jpeg
    3.7 MB · Views: 23
  • C4314CB1-73DB-4D21-BE8C-5C6EA87A2F20.jpeg
    C4314CB1-73DB-4D21-BE8C-5C6EA87A2F20.jpeg
    2.5 MB · Views: 20
  • 604711E3-0590-408F-AA92-6BE873F9CAAA.jpeg
    604711E3-0590-408F-AA92-6BE873F9CAAA.jpeg
    2.7 MB · Views: 23
  • 7D172AC7-CF7D-4A1C-8A50-1C1D2B8AEECA.jpeg
    7D172AC7-CF7D-4A1C-8A50-1C1D2B8AEECA.jpeg
    2.6 MB · Views: 29

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,296
First, pull the motor as you need to redo the transom

Build a craddle

Use a cup brush to remove foam
 

KJM

Lieutenant Junior Grade
Joined
Jul 31, 2016
Messages
1,186
Wow, from the mess you started with, you already got a lot of work put into this! I don't know anything about aluminum boats, but a lot of people hear will and have good advice. Don't give up!
 

awilson07

Cadet
Joined
Jan 25, 2021
Messages
9
Show the model number on my motor is a E40ELC0 but I cannot find anything on it except for a motor model number that is E40ELC0B. Is that the same motor? Thanks in advance.
 

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
24,829
Ask motor questions in the correct motor forum

Evinrude/Johnson correct?
 
Top