bruceb58
Honorary Supreme Mariner
- Joined
- Mar 5, 2006
- Messages
- 30,836
Re: Stereo help please!!!
Just for info, there is no way a deck takes 15 amps. More likely a bad ground vs a wire that couldn't supply the current. In any case, don't piggyback off a ground that goes to the gauge lights. Run a ground to the bus bar at the fuse block. Absolutely no need to run a ground back to the battery on a basic stereo unless you are running into a noise issue.The ground that you used most likely is much too small to run 10-15 amps with the deck turned up.
And this is because most stereo guys barely have a high school education. Come on...0 gauge wire? Give me a break.It'Most stereo guys use pretty heavy cable - like 0 or 2, not the 12 or 14 that your gauges are most likely wired with.
Good idea. No problem connecting both wires together despite what others say.But since I really don't care about the presets and the clock staying set I will just hook the red and yellow both into it and put the stereo power on a toggle switch.