Steering Wheel Removal & Repair

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,540
Nearly every boat steering wheel is held to a tapered shaft on the helm with a nut under the center cap
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,540
How do you remove the center cap? Pry off or somehow unscrew? Thanks
Depends. Some are snapped on (give a squeeze), some are held in with screws. Without being there to see, I would ve guessing
 

Drivewayboater2

Petty Officer 1st Class
Joined
Aug 21, 2019
Messages
334
I used a flywheel puller to get mine off… a lil tapping as I put pressure on the hub… it popped pretty good once released … be careful..there’s probably a key way on the hub as well… keep track of where it may fly… perhaps wrap a rag around it..
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
I used a flywheel puller to get mine off… a lil tapping as I put pressure on the hub… it popped pretty good once released … be careful..there’s probably a key way on the hub as well… keep track of where it may fly… perhaps wrap a rag around it..

Even better - Leave the nut on loosely. Then you won't get smacked in the mouth and the key won't fly.
 
Top