speed and dept

P-DUB

Recruit
Thread starter
Joined
Jun 11, 2008
Messages
2
I have a eagle 320 df fish finder gps. When i go over 10 mph the dept finder goes nuts . It reads over 1000 feet at times.
 
Joined
Oct 1, 2008
Messages
9
Re: speed and dept

Hey,

Ive seen the fishfinder on the boat I've been out on (not mine) jump all over the place too. I find it hard to believe that the depth really changes as much as what it says. Is something wrong with it or is this normal?


Thanks!
 

NelsonQ

Lieutenant
Joined
Aug 5, 2008
Messages
1,413
Re: speed and dept

Could happen for a couple reasons. One, the transducer in the water isn't designed for high speed applications but if it happens around 10mph, not likely.

Two, it could be improperly mounted or positioned (Most have a bracket that releases if impacted to prevent damage.) If it came unconnected, it could simply be 'flapping' in the water giving insane depths (300-500ft)

Lastly, you have a faulty transducer or even a receiving unit.

Check #2 first and see if that is the problem. Had it happen on several boats I've owned or been in. Hopefully that's the issue.
 

Boatist

Rear Admiral
Joined
Apr 22, 2002
Messages
4,552
Re: speed and dept

I agree this usually means the transducer is mounted too high.
At Least 1/2 of the transducer should be below the hull on the side toward the motor.
This means the side away from the motor may be complately below the hull on V Hulls.

It could also mean mounted to far away from the motor out near the chims where at speed it actually out of the water at speed.

It could be you have some hull feature creating air bubbles and turburlance ahead of the transducer.

Also on stepped hull where the lowest part of the hull does not go all the way to the stern.

With Eagle is is not going to be the transducer design.

You can try changing the sensitivity but more likely the above.
 
Top