Setting up a Test Barrel

[JakeCo88]

I have a 1956 Evinrude Fastwin and I want to set up a barrel to test it. My question is, how far up on the lower unit does the water need to go, basically, where is the water intake hole? Also, does anyone know where to find a service manual for this motor?

 

[kbait]

Re: Setting up a Test Barrel

Waterpump 'bulge' (where the lower unit connection bolts are located) must be completely submerged upon starting your motor. These pumps are not self-priming, and must be dunked to begin pumping water. Ebay has manuals, and other locations.. others will chime in. Good luck!

 

[HighTrim]

Re: Setting up a Test Barrel

I usually keep my water level just beneath the exhaust. As stated, keep that pump submerged.

Parts manual at www.marineengine.com

 

[boobie]

Re: Setting up a Test Barrel

Have it deep enough in the barrel as tho' it was mounted on the boat in the water.

 

[kfa4303]

Re: Setting up a Test Barrel

yup. Here's a vid of one running in a 55 gal. barrel. A big trash can works well too.


http://www.youtube.com/watch?v=lmoaYkkzzDQ

 

[SeaKaye12]

Re: Setting up a Test Barrel

Sorry to be showing the green one; I have a nice "Evinrude Blue" one too....