Sears (Ted Williams) 7 Hp Inspection

[Retired n Bored]

Looking for parts & exploded parts view (PDF). I like the unit but lack the knowledge of its innards. Replaced starter rope when I noticed leak in lower unit. Replace gasket & lube then noted it's stuck in drive. Linkage loose or broken. I was told by bro-n-law (owner) it started last time he had it out of storage. Anticipate impeller is toast but can't get lower unit off; linkage stuck somewhere in upper end.
Anybody?

 

[salvageyard saviour]

Love that screwdriver handle for the carb adjustment looks hotwired

When I get home, I'll look for that part diagram. May not be exact year but should work
Does it have forward and reverse?

 

[Retired n Bored]

Love that screwdriver handle for the carb adjustment looks hotwired

When I get home, I'll look for that part diagram. May not be exact year but should work
Does it have forward and reverse?

Thx 4 responding! Look 4ward it

 

[Retired n Bored]

Thx 4 responding! Look 4ward it

Forward & neutral but cannot select either as linkage seems to be disconnected or broken. I see a cable going up into the top end but heditate removing flywheel if I can avoid it.

 

[brim_buster]

One of the easiest motors to work on. Check your private messages

 

[salvageyard saviour]

I didn't get home until late last night.
Looks like brim buster got what you needed.

Good luck

 

[Retired n Bored]

Forward & neutral but cannot select either as linkage seems to be disconnected or broken. I see a cable going up into the top end but heditate removing flywheel if I can avoid it.

Email = wllong@sbcglobal.net
Thx