Reverse solenoid

[FourWinnsLC]

I need to replace this solenoid, but all i can seem to find are 1/32 orfice solenoids. Is that going to work on my set up? Do i need a change over?

thanks for the input!

 

[dingbat]

Yes, it will work with your setup.
Fit, form and function replacement for what you have now

 

[FourWinnsLC]

Ok, replaced the solenoid, still can’t back up. I verified I have power to the solenoid.

what should my next next trouble shooting step be?

 

[89retta]

Check the ground

 

[FourWinnsLC]

Yeah that was my first thought as well. All good to go there.

 

[Lightwin 3]

Your solenoid can be fine but if there is air in your lines, it won't work. Neither will your brakes.

 

[dingbat]

If you hear a click the solenoid is working.

Blocking solenoids are a pain. Not the most effective method to begin with.

Replacing the solenoid introduced air into the system. Will take darn near a bottle (small) of brake fluid to bleed properly. System will not work properly until you do

 

[FourWinnsLC]

Good stuff, I do have breaks though. Should I still bleed the breaks for the solenoid to work?

great day on the lake either way

 

[Lightwin 3]

I would. You may have brakes (soft) but not up to full potential.