FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
You need to check the lower shift cable. When they get corroded, you lose the ability to put the outdrive into reverse. The easiest way is to pull the outdrive and turn the shift yoke to the reverse position and see if it engages. If so, replace the lower shift cable and inspect the shift bellows for holes or cracks and replace it if you find any.
I recommend a manual for replacing the lower shift cable. It is not a staight forward procedure.