Replace upper motor mount on 25 HP 1983 Evinrude?

bobg51635

Recruit
Thread starter
Joined
May 24, 2018
Messages
1
What's involved in replacing the upper robber motor mount on a 25 HP 1983 Evinrude outboard motor?
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
There is more than one mount up top.----One on the front and 2 on the sides.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Can't say that I've done a 1983, but it really doesn't look much different than older ones that I've done plenty of. The general procedure is remove the clamshells from the lower mount and the nuts from the three upper ones. You don't have to totally remove the nut from the upper front one, but back it off several turns. Remove the vertical throttle shaft for ease of reassembly, and the fuel hose. Then swing the lower unit rearward and lift the whole motor up and out of the steering bracket. It will be much easier if you have a hoist of some kind to lift it.
 
Top