Rebuilding the trailer

Yardwork

Seaman Apprentice
Joined
Mar 30, 2021
Messages
35
I have taken on the project of rebuilding the boat trailer, something I have never done. The trailer was sound and I brought the boat home on it but the bearings were a little loose and there was water inside the cap. There is a lot of rust on the frame, the lights need replacing, the winch and tong jack are ancient. I'm not sure but in researching the bunks and rollers I am under the impression that the trailer was not set up correctly for this boat. I have started by taking the trailer completely apart and grinding with a wire brush all the paint and rust off.
 

Attachments

  • IMG_8043-2.JPG
    IMG_8043-2.JPG
    3.8 MB · Views: 17
  • IMG_8116.JPG
    IMG_8116.JPG
    4.2 MB · Views: 18
Last edited:

Yardwork

Seaman Apprentice
Joined
Mar 30, 2021
Messages
35
I then primed the frame and all the parts.
 

Attachments

  • IMG_8147-3.JPG
    IMG_8147-3.JPG
    4.1 MB · Views: 7
  • IMG_8149-3.JPG
    IMG_8149-3.JPG
    6.2 MB · Views: 7

Yardwork

Seaman Apprentice
Joined
Mar 30, 2021
Messages
35
I chose a Rust-Oleum industrial paint for the color. Next I will start assembly.
 

Attachments

  • IMG_8167-2.jpeg
    IMG_8167-2.jpeg
    3.6 MB · Views: 8
  • IMG_8168-2.JPG
    IMG_8168-2.JPG
    5.7 MB · Views: 8

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
70,958
Ayuh,..... Welcome Aboard,..... It's lookin' good,.....
 

JimS123

Fleet Admiral
Joined
Jul 27, 2007
Messages
8,164
I did the same thing eons ago. Except I pre-primed with rust reformer before using the fishoil primer. I sold the trailer 21 years later and the rust had still not come thru.
 

Yardwork

Seaman Apprentice
Joined
Mar 30, 2021
Messages
35
I am going to start setting up the proper bunks and keel guides this week.
 

Attachments

  • IMG_8207-6.JPG
    IMG_8207-6.JPG
    3.7 MB · Views: 6

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,604
I did the exact same thing to my pathetic trailer when I bought a boat, engine and trailer package of an old worn out setup. If you would like to see how I did everything, click on the trailer link below. Lots of pictures and ideas to set up a trailer for one particular boat. And you can customize your trailer however you like. Then you know it is built correctly.
 

Yardwork

Seaman Apprentice
Joined
Mar 30, 2021
Messages
35
I finished the trailer today and took the boat to the license office to transfer the registration. I was stoped on the way by a guy asking where I had purchased my new trailer...felt good.
 

Attachments

  • IMG_8312.JPG
    IMG_8312.JPG
    3.4 MB · Views: 20
  • IMG_8316-2.JPG
    IMG_8316-2.JPG
    3.9 MB · Views: 20
  • IMG_8262.JPG
    IMG_8262.JPG
    3 MB · Views: 20

Yardwork

Seaman Apprentice
Joined
Mar 30, 2021
Messages
35
Boat, motor and trailer are ready to go.
 

Attachments

  • IMG_8423.JPG
    IMG_8423.JPG
    2.7 MB · Views: 4

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,604
Boat, motor and trailer are ready to go.
I see some fishing in your future now. Your project reminds me how I started in fishing. I bought an old 12' Feathercraft V bottom aluminum boat, I found a display trailer at K-Mart that they were getting out of the trailer market. I got it for cheap. And I bought a used, non-working, Sears 7.5 HP air cooled engine. And the rest is history now. Nice to see you're ready to go now. Thumbs Up!
 

Yardwork

Seaman Apprentice
Joined
Mar 30, 2021
Messages
35
She ran great and launching/loading was simple.
 

Attachments

  • 5A738FF8-9EFC-4B78-8D04-D97DDFCEC58F.jpeg
    5A738FF8-9EFC-4B78-8D04-D97DDFCEC58F.jpeg
    1.7 MB · Views: 8
  • 33A8919A-BF4F-4071-BCBE-1C84825B901E.jpeg
    33A8919A-BF4F-4071-BCBE-1C84825B901E.jpeg
    2.6 MB · Views: 8
  • 3AA0EC60-E11C-468B-A196-7447113386C1.png
    3AA0EC60-E11C-468B-A196-7447113386C1.png
    2.2 MB · Views: 8
Top