Yardwork
Seaman Apprentice
- Joined
- Mar 30, 2021
- Messages
- 35
I have taken on the project of rebuilding the boat trailer, something I have never done. The trailer was sound and I brought the boat home on it but the bearings were a little loose and there was water inside the cap. There is a lot of rust on the frame, the lights need replacing, the winch and tong jack are ancient. I'm not sure but in researching the bunks and rollers I am under the impression that the trailer was not set up correctly for this boat. I have started by taking the trailer completely apart and grinding with a wire brush all the paint and rust off.
Attachments
Last edited: