Rebuilding raw water pump 1990 230A

Fishermark

Vice Admiral
Joined
Oct 19, 2003
Messages
5,617
Hello all. I am in the process of rebuilding the raw water pump on my 1990 Vovlo Penta 230A (similar to the AQ131). The rear seal is leaking and I have purchase a kit which includes pretty much everything, including the shaft and new bushings. I have a press and can press out the bushing on the body of the pump housing itself, but the bushing in the front cover is a blind hole. Any suggestions on pulling that bushing? There really isn't much room for any sort of puller.
 
Top