rickrabies
Cadet
- Joined
- Jun 20, 2017
- Messages
- 12
I got this boat dirt cheap.
It sat 16 years.
the transom had an aluminum C channel half covering it. waterlogged inner wood and (%90)completely rotted.
I have gotten mostly all rotted wood out. Was like sawdust. Used a skinny pipe hooked to shop vac
Anyways there is *intact* wood still down at the bottom, HOW DO I REMOVE IT? without cutting and destroying the fiberglass shell its in.
im no boat expert. nor big pockets. hence old free boat with handy work to fish out of it when done.
I thought about flipping it and laying under it to gouge it all out with a bar. but my back hurts have no help.
It sat 16 years.
the transom had an aluminum C channel half covering it. waterlogged inner wood and (%90)completely rotted.
I have gotten mostly all rotted wood out. Was like sawdust. Used a skinny pipe hooked to shop vac
Anyways there is *intact* wood still down at the bottom, HOW DO I REMOVE IT? without cutting and destroying the fiberglass shell its in.
im no boat expert. nor big pockets. hence old free boat with handy work to fish out of it when done.
I thought about flipping it and laying under it to gouge it all out with a bar. but my back hurts have no help.
Last edited: