Rebuild Donzi and 4.3 Vortec

[SawDust{RM}]

Re: Rebuild Donzi and 4.3 Vortec

Donzi is the only one so far I have seen that seals the transom hole with gel coat, the rest have been exposed wood & rotted on the bottom, OMC used Stainless Steel bolts on the transom assembly, every Merc Gen 1 & II studs look like they came from the hardware store, whats left of them

 

[SawDust{RM}]

Re: Rebuild Donzi and 4.3 Vortec

Well Floor Job is Done it Don't copy & paste very good
Descript Qty PerUnit Total

Plascore ? x Sq Ft 96 2.99 287.04
Plascore 3/4 x Sq Ft 32 3.75 120
Plascore 3/8 x Sq Ft 16 2.85 45.6
Polyester Resin Gal 24 28.5 684
MEK-P 2 7.7 15.4
5 lb Chopp Glass 4 14.95 59.8
10 lb Foam Board 3/4 32 6.98 223.36
Gelcoat Wte 1 Qt 3 13.99 41.97
Gelcoat Blk 1 Qt 1.5 18.19 27.29
Bondo 1 Qt 32 6.99 223.68
ARJ Pourable Ceramic 3 35.99 107.97
2 Gal Foam Kit 0.5 109.49 54.75
1.5 oz Glass Mat Yd 45 4.25 191.25
Acetone Gal 1 14.99 14.99
Misc Rollers/Gloves/Towels/Discs/etc 54.95

Total 2152.05

 

[proshadetree]

Re: Rebuild Donzi and 4.3 Vortec

Well what good is that post with out a picture? Glad to see you still moving along. Just to cold to work on my stuff.

 

[SawDust{RM}]

Re: Rebuild Donzi and 4.3 Vortec

Been sanding on the hull & the stripe, some fill work on stripe
will be sprayin gel coat on the outer transom to fill the cracks & indent left from the OMC unit next week, painting the stripe soon after ( not red ) tired of movin the doghouse around the shop so its finished & brought it to the House
the grey is carbon the yellow is canary with a pattern to match the carbon & new SS cup holders

 

[SawDust{RM}]

Re: Rebuild Donzi and 4.3 Vortec

After alot of sanding the Hull buffed out nice, just some crap hanging on the side from from a recent rain, I had to take the paper off after the prime.
Paint will take 30days to arrive (WTF) tape still in place under the primer