Random

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
16,081
I was actually looking at replace motors that would bolt up to the winch as well... Thumbs Up!
You need the frame size and HP of the existing to source a new motor.

Both should be found somewhere on the frame unless Chinese made, then all bets are off. Marking parts isn’t a priority ;)
 

dwco5051

Commander
Joined
Sep 14, 2008
Messages
2,411
Is that Santiago in the boat?
Actually that might be Spencer Tracy. I was thinking of turning my book into a movie and thought he would be ideal for my part. However I have been calling the last number I had in my Rolex for him with no answer for two weeks. Having the same problem reaching Oliver Hardy for the part of Manolin.
 

redneck joe

Supreme Mariner
Joined
Mar 18, 2009
Messages
10,919
I am currently 'studying' for a colonoscopy in the morning. Not trusting anything for the next 24 hours...
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,574
I am currently 'studying' for a colonoscopy in the morning. Not trusting anything for the next 24 hours...
Clenpiq? If so .. it will be about 2am when it finally goes...... Make sure the dog isn't sleeping between you and the kamode
 

redneck joe

Supreme Mariner
Joined
Mar 18, 2009
Messages
10,919
No, all OTC stuff and I'm halfway thru my 64 oz pf gatorade with a full bottle of mirilax mixed in. AC had one a couple months ago and i think I'll be ok by bedtime but just in case i get the bed to myself, no dogs there.
 

WIMUSKY

Moderator
Staff member
Joined
Sep 26, 2009
Messages
19,912
No, all OTC stuff and I'm halfway thru my 64 oz pf gatorade with a full bottle of mirilax mixed in. AC had one a couple months ago and i think I'll be ok by bedtime but just in case i get the bed to myself, no dogs there.
The new concoction is way better than the old. Adding gatorade makes a huge difference, had it done in Nov, good for another 10yrs.... Good Luck!
 
Last edited:

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,604
I know it is hard to believe, but the hard part is what you are going through now. The actually procedure (that sounds better for some reason) is a snap. Both my wife and I had it done last year and we are golden for a long time now...
 

WIMUSKY

Moderator
Staff member
Joined
Sep 26, 2009
Messages
19,912
And they put a person out differently. I had no idea what was going on, but when I came "out of it", I felt fantastic. Mr Mellow Yellow..... The whole process was much better than 10yrs ago...
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,604
And they put a person out differently. I had no idea what was going on, but when I came "out of it", I felt fantastic. Mr Mellow Yellow..... The whole process was much better than 10yrs ago...
And it all seemed like I merely closed my eyes and opened them up and was told it was all finished...
 

airshot

Vice Admiral
Joined
Jul 22, 2008
Messages
5,085
Don't make it so difficult....divide one gallon (128 oz.) by the ratio you want.....128 divided by 50 equals 2.56 oz of oil per gallon of gas. If you have a 32 ratio.....128 divided by 32 = 4 oz per gallon. Now multiply the number of gallons you want to mix times the amount of oil needed per gallon. Use the KISS method...keep it simple stupid...works for me !!!
 

redneck joe

Supreme Mariner
Joined
Mar 18, 2009
Messages
10,919
Don't make it so difficult....divide one gallon (128 oz.) by the ratio you want.....128 divided by 50 equals 2.56 oz of oil per gallon of gas. If you have a 32 ratio.....128 divided by 32 = 4 oz per gallon. Now multiply the number of gallons you want to mix times the amount of oil needed per gallon. Use the KISS method...keep it simple stupid...works for me !!!
Wrong thread or am i missing something?
 
Top