Power Trim

[KYNC12345]

I have a 2008 Yamaha 50TLR with a power trim that attempts to lift but doesn't. Battery is good, fluid level is good. Worked going on lake but not upon return. No visible leaks. Make a weak lifting sound like if battery was low, but again battery is good. Please help.

 

[99yam40]

hook a voltmeter to the incoming and out going terminals of the T&T repay to see what kind of voltage is getting to the T&T motor, would not hurt to check the voltage is on the battery itself to compare to that the T&T relay and motor is getting.
maybe just burnt contacts in the TT&T relay not letting full voltage to go to motor

 

[boscoe99]

Or disconnect the terminals from the relay. Apply battery power directly to the blue wire and the green wire. See if the T&T unit functions normally.

 

[KYNC12345]

hook a voltmeter to the incoming and out going terminals of the T&T repay to see what kind of voltage is getting to the T&T motor, would not hurt to check the voltage is on the battery itself to compare to that the T&T relay and motor is getting.
maybe just burnt contacts in the TT&T relay not letting full voltage to go to motor

Thank you very much for the information. I'll do that as well and I'll let you know how it goes.

 

[KYNC12345]

Or disconnect the terminals from the relay. Apply battery power directly to the blue wire and the green wire. See if the T&T unit functions normally.

Thank you for that information. I'll check and let you know how it goes.