power trim hoses

[jopes]

I got a hose that's starting to fray and I figure it is probably best to replace all 4 hoses rather than having them blow out on me. My issue is I can't figure out which ones I need from iboats. It is a 88 Maxim with a 5.0 alpha one drive.

 

[MarkSee]

Re: power trim hoses

These links may help you a bit as it seems you need to get the OEM part number then look on the IBOATS link and scroll to where you find that OEM part number.

By what I can tell for your model, the hose from the distribution block to the front (#3) of each ram is 32-99904q, the starboard back (#6) which shows 2 choices and port (#7) has 2 choices. Not quite sure of the differences with those 2 choices.
http://www.mercruiserparts.com/Show...=220&bdesc=TRIM+CYLINDERS+AND+HYDRAULIC+HOSES


Then looking at the IBOATS page: Mercruiser Power Trim Hoses - iboats
scroll down for either the Sierra or Mallory choices and there are some descriptions on what they fit and the OEM part number.

Mark

 

[jopes]

Re: power trim hoses

Thank you for posting that link. Don't know why I forgot about it because that is where I ordered all my swivel pin stuff from.