PLEASE HELP Electical Issues

BCHONE

Recruit
Thread starter
Joined
Jun 2, 2011
Messages
1
First thanks for welcoming me to this forum. I hope that I will be able to contribute to other boaters but for now I have a issue I can not resolve.

When I have power to the boat and turn on my Nav lights the battery voltage meter drops to 0 and my fuel gauge pegs out past the Full indicator. When I turn off the Nav lights everything returns to normal. Okay well here is where it gets strange. Having the Nav lights OFF and operating in a idle forward or reverse all the gauges work as they should. However, keeping the Nav light still in the OFF position and accelerating to above 10knots the fuel gauge pegs out past Full and my voltage meter drops to 0. But then my anchor light turns on! When I idle back down - the anchor light goes off and my gauges return to normal after a moment at idle. None of this makes any sense. I am lost on where to begin my hunt.

As I am typing this I just noticed my forward Nav lights do not turn on either manually or when the throttle is engaged above 10knots but the anchor light does. Is the problem only with the Nav lights on the bow of the boat?? This does not seem plausible to cause these variety of issues both under power or not. Someone please HELP!

Another thing I have noticed the gauges or switches never illuminate under any situation and I see by the wiring they are tied to the Nav light switch. There does not seem to be a ground wire at either end of the series to the switches that is attached to a primary ground. The black ground wire just runs between the switches but does not connect on either end to a grounding point. The gauges however are. Is this the problem?? I do not want to start rewiring the boat without getting some advice :confused:.

Boat Sea Pro 180CC with Yamaha 115 4stroke

Thanks so much in advance!
 
Last edited:

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: PLEASE HELP Electical Issues

There is a wiring diagram (generic) at the very top of this forum in the stickies. It won't be an exact match for what you have but you will get an idea how instruments are wired. Illuminated switches have a ground terminal on them that must be connected to the boat ground. That terminal IS NOT a ground point for other electrical items. Acceleration and deceleration should have absolutely nothing to do with how the accessories work so the only relationship would be that you have some loose connections that are creating a circuit cross (not technically a short) but rather one circuit activating another. The fuel gauge pegs because the "S" terminal on the gauge is being somehow connected to the ground terminal thus making it read full. That can happen either at the gauge, or at the sending unit at the tank, or the wire running between the gauge and the sending unit may be grounding due to chaffing or being pinched somewhere. My thoughts are to stick you head under the helm and one terminal at a time, make sure attached wires are tight and not touching other terminals.
 

sw33ttooth

Chief Petty Officer
Joined
Apr 24, 2011
Messages
498
Re: PLEASE HELP Electical Issues

its got something to do with the blue wires that power your lights for the gauges its grounding out on the fuel and volts. also agree speed and rpm should have nothing to do with volt and fuel gauge peging
 
Top