Omc cobra single shift cable setup?

boattoy

Petty Officer 2nd Class
Joined
Aug 21, 2010
Messages
116
Working on a mid 90s omc cobra drive with 5.0 efi engine . It only has one shift cable and I bought a replacement cable but it’s not right on the drive end. This boat has a hose that runs up from the transom with the cable inside and then cable goes directly to shifter. No bracket or “lower shift cable”. everything looks old and original from the 90s so I doubt it’s been modified from the factory. Any idea where to get a cable or maybe a manual on this type of drive ?
 

Attachments

  • F3453CB6-27CB-4023-AA46-CEB389DEDCFD.jpeg
    F3453CB6-27CB-4023-AA46-CEB389DEDCFD.jpeg
    1.9 MB · Views: 11
  • 46DEE10A-48BC-4A63-A388-B8D0128425B2.jpeg
    46DEE10A-48BC-4A63-A388-B8D0128425B2.jpeg
    1.9 MB · Views: 13

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
70,953
Ayuh,.... Sounds more like an ole AQ Volvo,....
Step back, 'n take some more pictures of the drive, 'n motor,.....
Got some serial / model numbers,..??..??
 

Horigan

Senior Chief Petty Officer
Joined
Jun 12, 2016
Messages
673
A picture of the old and new cable ends side by side would be helpful also. If it’s a Cobra SX and there’s a hump on the top of the drive it’s a joint venture drive with Volvo, with the drive being the same as a Volvo SX-M.
 

boattoy

Petty Officer 2nd Class
Joined
Aug 21, 2010
Messages
116
Ayuh,.... Sounds more like an ole AQ Volvo,....
Step back, 'n take some more pictures of the drive, 'n motor,.....
Got some serial / model numbers,..??..??
 

Attachments

  • 05A13883-96A6-4C23-8C1F-BC5C2B1A24A7.jpeg
    05A13883-96A6-4C23-8C1F-BC5C2B1A24A7.jpeg
    1.5 MB · Views: 7
  • 236A0F1D-2753-487F-8E01-C00B0AEAEE7F.jpeg
    236A0F1D-2753-487F-8E01-C00B0AEAEE7F.jpeg
    1.2 MB · Views: 7
  • 56E079B7-148B-4DD7-A72D-B99E9C7157AC.jpeg
    56E079B7-148B-4DD7-A72D-B99E9C7157AC.jpeg
    1.8 MB · Views: 8

Lou C

Supreme Mariner
Joined
Nov 10, 2002
Messages
12,652
The ID plate & pic of the drive tell it all: Joint Venture Cobra same as a Volvo SX of the same year. Just painted a different color (OMC Charcoal instead of Volvo Silver).
 

Horigan

Senior Chief Petty Officer
Joined
Jun 12, 2016
Messages
673
It's still not clear how the new and old cables are different. If you bought an older OMC cable, that could be the issue. Try a Volvo SX-M cable or the right length.
 

Lou C

Supreme Mariner
Joined
Nov 10, 2002
Messages
12,652
I’m not sure but I’m think the Volvo used a single cable system from the remote control to the outdrive. The original dog clutch Cobra was always
a 2 cable system with a bellcrank on the engine shift bracket.
So that one is as you’d expect just like a Volvo.
 

bruceb58

Supreme Mariner
Joined
Mar 5, 2006
Messages
30,537
Show the pictures of each end of the cable. When these joint ventures came out, they had the Volvo end at the drive side and the OMC end at the control side. If the Control was changed, they it will not have the OMC end anymore.
 
Top