Mapquest68
Cadet
- Joined
- Aug 5, 2018
- Messages
- 6
Don't know who to ask or what to ask... So here goes. I am re-decking/ rebuilding my old 1970 Monark 17 ft pontoon boat. When I pulled the carpet off the end of the toon I found a round "hatch"that is screwed down with about 8-10 screws. I have no idea what it's for unless it's to get water out as there are no drain cocks on the end. At the front of the toons there is a Schrader valve and just aft of it is a bolt sticking up with a washer and a rubber seal on the underside. The bolts I'm sure are probably not removable as every bolt and screw I've dealt with on this thing has been ground off with a cut off wheel. The toons are flat on top. They are not round. More of a U shape{?}. I can't find any info at all on this old boat online and hope maybe someone in here helped their Grandpa rebuild theirs back when they were kids! I can post some pics later if I get any responses. Thanks!