Oil injector probelm

oceancity

Recruit
Joined
Aug 18, 2010
Messages
4
I have a 1993 90 HP Mercury with oil injection. Replaced 5/16" clear oil line which goes from pump to gas line. Bleed systembut not pumping oil. Help!
 

Dave1027

Lieutenant Junior Grade
Joined
May 25, 2010
Messages
1,081
Re: Oil injector probelm

How do you know it's not pumping oil? How did you bleed the system?

You can verify the pump by hooking motor to an aux tank of 50:1, disconnect clear hose from fuel pump, disconnect link rod and turn oil regulator full wide open. Then start the engine on muffs or in water. Does any oil pump out? My book says you should get 18.7 cc idling for 15 minutes.
 

oceancity

Recruit
Joined
Aug 18, 2010
Messages
4
Re: Oil injector probelm

See only about 1/2" of oil in clear tube coming from pump but not coming up from pump to gas line. Opened up screw from top of pump and bleed.
 
Last edited:

Dave1027

Lieutenant Junior Grade
Joined
May 25, 2010
Messages
1,081
Re: Oil injector probelm

You are supposed to bleed till the clear hose is full of oil with no air bubbles. Maybe the hose from the oil tank is clogged?
 
Top