NMEA adapter to connect Garmin chart plotter and iCom radio?

Tobias Peter

Cadet
Joined
Mar 19, 2022
Messages
13
Looking to connect radio and chart plotter via NMEA, but radio plug won’t fit 38DCB80A-0259-4FFB-943E-03E2BE0744E5.jpegchart plotter…help?
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,056
cheaper to get a new radio
Maybe, the converter is 200, a plug n play 2000 is over 300 and most 400

Been looking my self for my new boat, be nice if they had a regular size flush mount with 2000. All the ones that have it built in are larger units
 

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
16,074
Maybe, the converter is 200, a plug n play 2000 is over 300 and most 400
Look around a bit……the Standard Horizon GX1850W supports NMEA 2000 for $210

Moot point if the OP has a newer Garmin as it appears to be. The NMEA 0183 wires are bundled in with the power connector
 

sam am I

Commander
Joined
Jun 26, 2013
Messages
2,169
I'll assume you're hooking up for DSC/DSE....

So in your hand, as you probably already know, you're holding the ICOM's NMEA0183 comms wires, your Garmin is very much capable AND can communicate/hookup with NMEA0183(as well as NMEA2K) devices such as your Icom VHF.

You require nothing else but to have to wire the two together manually(strip, twist, solder, heat shrink) if you will. See the following info and paying attention to wires functions and not so much colors when hooking up/together.


https://support.garmin.com/en-US/?faq=va3ugTAr1F4osCzrNKgSA7

(Shows a garmin VHF, your ICOM is same difference. Also your Garmin's NMEA0183 hookuo wires are located together with its power connecting wires, ie, same loom.....Check your owners manual for more info. Also also, you'll have to drill down into a few manu items on the garmin to tell it that its comms are on the/in NMEA0183 mode/port)
 
Last edited:

04fxdwgi25

Chief Petty Officer
Joined
Mar 25, 2022
Messages
537
Here is the connections DWG I used to connect my Std Horizons DSC to the new Garmin Echomap 74 SV I installed. Works fine.

As others state the NEMA 0183 connection is bundled in the power cord
 

Attachments

  • Connecting to Garmin Echomap UHD 74SV.pdf
    174.6 KB · Views: 5
Top