Hey new to the forum and been looking through pictures and websites trying to find an answer and now I'm here. I've been working on a mid '60s big twin and I think it's around a 35 or 40 horse. Its going on my '73 polar craft that I just completely rebuilt. Its running like garbage though, under no load it revs all the way but in the water it only gets to about 25%. This motor was completely rebuilt before I got it and I know that just by seeing how clean everything is. I cleaned the carb which was spotless, tried fresh gas, and now I'm at ignition because it will also run for a few seconds and then just completely shut off. They points condensers and coils look new. But what I noticed was on the crank where the points ride there is no "removable" cam. They are just riding on the crank and there is a slight hump on the crank but every picture I can find there is a cam there. I'm just trying to figure out if someone got crazy with a file or if this is stock.