Hello all,
Relative newb here, need some help with a part. Just wrapping up a water pump job on a new to be 40hp Evinrude, 1988 model E40ELCCS w/ remote controls. I found a gasket laying in the bottom of the gear case exhaust channel that got me looking, and I believe I am missing a part. I have a few pictures noted that might help, a photo of the gear case with the area circled where I believe I'm missing the part, a picture from the OMC manual showing the part I think I'm missing, and a parts diagram from iboats with the item I think I need circled (item #60). The pic of the gear case is all I have, and I believe there should be something approximately 4-5" tall sticking up from this piece that would link up with the exhaust outlet in the midsection - right now, it's just a big gap. Problem is I can't find this item #60 on any of the parts lists to identify or purchase it. Does anyone have any ideas about this thing? What is it called, is it necessary, where can I find one? I'm thinking it must be obsolete if not in the parts lists, but thought I would consult the brain trust before calling no glory. I believe strongly in trying to maintain my motor the way it was designed; not sure if this is a critical component but figure it must have had a reason for being in there. Not above trying to fab something up if that's my only option. Any thoughts on an appropriate material if I need to go this way? Thanks in advance for any help you can give, I'm really at a loss with this one.
Relative newb here, need some help with a part. Just wrapping up a water pump job on a new to be 40hp Evinrude, 1988 model E40ELCCS w/ remote controls. I found a gasket laying in the bottom of the gear case exhaust channel that got me looking, and I believe I am missing a part. I have a few pictures noted that might help, a photo of the gear case with the area circled where I believe I'm missing the part, a picture from the OMC manual showing the part I think I'm missing, and a parts diagram from iboats with the item I think I need circled (item #60). The pic of the gear case is all I have, and I believe there should be something approximately 4-5" tall sticking up from this piece that would link up with the exhaust outlet in the midsection - right now, it's just a big gap. Problem is I can't find this item #60 on any of the parts lists to identify or purchase it. Does anyone have any ideas about this thing? What is it called, is it necessary, where can I find one? I'm thinking it must be obsolete if not in the parts lists, but thought I would consult the brain trust before calling no glory. I believe strongly in trying to maintain my motor the way it was designed; not sure if this is a critical component but figure it must have had a reason for being in there. Not above trying to fab something up if that's my only option. Any thoughts on an appropriate material if I need to go this way? Thanks in advance for any help you can give, I'm really at a loss with this one.
