Need advice on new purchase...

skipperImnot

Recruit
Joined
Aug 10, 2011
Messages
4
First post so bear with me.
Just purchasd a '93 Larson 200 SEI. Boat is in very good shape but I have been in the process of addressing a few issues.
There is a large patch in the middle of the floorthat has settled ever so slightly causing a lip where the kids will end up tripping.
This section, I am assuming is where the floor was spliced to gain access to the fuel tank, right in center, starting slightly behind driver - approx. 2.5 ft wide and runs all the way to engine compartment.
So here my question. How do I remove this center section? Is it secured somehow or just pressed in tight like a puzzle?
Also shopping for a new cover. There is a listing for a 200 SEI & a 200 SEI BR. How do you tell the two apart.
I thought BR was the bowrider and the other was the cuddy. Cover description says BR is european hull design with integrated swim platform and rounded windshield. My boat has a integrated swim platforn but a chiseled (more square) windshield.

Any other comments anyone has on this boat would be appreciated. It has a 5.7L with a Alpha one drive.

Thanks in advance.
 

tpenfield

Moderator
Staff member
Joined
Jul 18, 2011
Messages
19,222
Re: Need advice on new purchase...

Welcome to iBoats . . .

Maybe you should post some pictures of this "patch" . . . That may help get some specific comments and advice.

"settling" is unsettling as that may indicate an issue.

Is this a carpet over wood floor? or a fiberglass floor with wood core?
 
Top