FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
if your gonna use alum.you need a tig welder thats capable of continuous high freq. and you must use a/c not dcen or dcep,1/8 tungsten with a ball on the end,hope that helps if you are gonna use alum,if not a stick welder with some 7018 3/32will work just fine but you might find yourself doing alot of grinding...
I was going to make my own tower. I found a company call Sharpe Products http://www.sharpeproducts.com/ that sells pre-bent elbows and other parts in various sizes of steel and aluminum. Had a CAD drawing of what I was going to build and then came across a cheap powder coated aluminum tower with speaker can and wake board rack for far less than I could build one. Check out their site if you are thinking about building one.
