15' Bay Boat, Outcast DF (H2O) with 25HP Yamaha. The boat and engine weigh 1050. There is an 8'Talon on the back. Cranking battery in the rear. Deep cycle battery and Minn Kota Riptide in the front. The boat is rated for a 40HP engine.
The boat gets up nicely and does 22-23 mph when its just me onboard, which is just what I expected. The problem occurs when my 220lb buddy and his 20lbs of fishing gear is on board. Then the boat will only come up 1 out of 3 times and only if conditions are perfect. The ass end just won't come up and cavitation issues start at about 10-12 mph/46-48 RPM.
Would trim tabs help? I really don't want to re-power it with a 40.
Thoughts?
The boat gets up nicely and does 22-23 mph when its just me onboard, which is just what I expected. The problem occurs when my 220lb buddy and his 20lbs of fishing gear is on board. Then the boat will only come up 1 out of 3 times and only if conditions are perfect. The ass end just won't come up and cavitation issues start at about 10-12 mph/46-48 RPM.
Would trim tabs help? I really don't want to re-power it with a 40.
Thoughts?