My boat run slowly. 120HP,2.5L,1989

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
My engine can run with maximum speed of 33 miles a week ago. But it run rough with maxinum speed of less than 10 miles yesterday. What happened my engine?
 
Last edited:

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,054
My engine can run with maximum speed of 33 miles a week ago. But it run rough with maxinum speed of less than 10 miles yesterday. What happened my engine?
We don't know, your going to need to do some testing

Suggest
Do a compression test

How long have you owned the boat?
 

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
Today I did a cylinders pressure testing. They are 130, 130,100, 130. Last year the third was 120. Can it be fixed?
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,054
Not bothered by the one at 100, could be anything and not really be a factor when running

That said, if your gauge is accurate then the motor may just be getting tired

Is the timing set correctly, is timing advancing and if so how much?

How do the plugs look, all the same or different?
 

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
They are nearly the same. I only took pics of three.
 

Attachments

  • PXL_20230626_221541296.jpg
    PXL_20230626_221541296.jpg
    2.4 MB · Views: 15
  • PXL_20230626_221829816.jpg
    PXL_20230626_221829816.jpg
    2.3 MB · Views: 17
  • PXL_20230626_222346876.jpg
    PXL_20230626_222346876.jpg
    2.1 MB · Views: 15

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
I replaced the gasket of timing distribution which led to the invalid of timing. Then I redo the timing and it works. Should I reset the timing?
 

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
First two plugs are the same, third is different

When was the last full tune up?
Yes. The third plug was loosen when I was in the lake last fall. And I bought one and put it back. Then it works. I owned this boat for four years. And have not yet had it tune up
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,054
I showed these to pics to the wife and she has never done any motor work and she sees a difference
Slide1.JPGp2.jpg
 

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
Are they ok?
 

Attachments

  • PXL_20230626_235049359.jpg
    PXL_20230626_235049359.jpg
    2.9 MB · Views: 13
  • PXL_20230626_235036848.jpg
    PXL_20230626_235036848.jpg
    3.4 MB · Views: 13

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
I have replaced the spark plug and motor runs more smoothy. Thank you everyone.
 

dubs283

Vice Admiral
Joined
Jul 27, 2005
Messages
5,322
I do not

Possible that was a reason for poor runnability

Based on the other pics of cap, rotor, points, etc I'd say OP is due for a full tune up
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,538
lots of oil on the plugs - that indicates blowby
the one plug is missing its electrode indicting
there are bits of aluminum on the electrodes indicating the timing is off
being points, you have to set dwell before you set timing. so file the points, set dwell to about 30 degrees, then set timing.
 
Top