blaketippett
Recruit
Thread starter- Joined
- Mar 4, 2016
- Messages
- 1
I got a boat from a guy and it was wired up and turning over, kinda, you had to hit the key switch a few times to get it to spin so i looked at the solenoid and seen it was a good bit old and rusted. well i seen a few wires had been cut and taped and not in use so i cut them and wire nutted them to make it a little neater inside the box with the solenoid and replaced the solenoid with a new one. now i have NOTHING! I have on the left my green and battery wire the right is my red wire going to my starter and the 2 white wires on top to engage the starter and my negatives are on the box with a wingnut. i can take an alligator clip and connect it to the left side with the red and green wire and touch it to the small white wire on the top of the solenoid and it will spin but nothing with the key switch...i have not moved any wires at all just replaced my solenoid...what may be causing this?