FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I have a MOTOR-GUIDE BRUT HYPER. I'm missing speeds 1 & 2 on both the 12 & 24v side. I do have speeds 3, 4, and 5.. Speeds 3 & 4 are the same speeds with no change on both sides (12&24v). Any ideas...
Some motors use "speed coils" which are wire-wound resistors to reduce the voltage to the motor to control speeds. These coils are wired in series/parallel combinations to keep the number of coils required to a minimum. These coils can open up thus preventing that speed from operating or to cause no difference between certain speeds. The repair is to replace the speed coils.
