201Liberator
Recruit
- Joined
- Mar 22, 2011
- Messages
- 5
Ok first of all i must say this is a very useful forum and very knowledgable people who reply. So here goes, I have a 201 Liberator with a 5.7 King Cobra outdrive that i recently bought with a cracked block. The new engine is in so i decided it needed a new gimbal bearing, the question i have is whats a good starting point for leveling the engine for alignment. Should i have the boat completely level and set my level on the air cleaner and get the motor level, because its whiping my butt ! Since i didnt remove the motor i have no idea if they screwed the front motormount nuts up or down but it doesnt line up even close with the alignment tool. So any help or comment would be appreciated. Thanks Aaron