Mercruiser 5.7 ?

Beretta1

Cadet
Joined
Jun 12, 2021
Messages
19
Anyone know the horse power of a ‘97 5.7 V8 Thunderbolt ? OK142149 is the serial #. Also where do I find the gear ratio ? Just purchased a 1997 Bayliner Capri 2052 LS with this engine.
 
Last edited:

dubs283

Vice Admiral
Joined
Jul 27, 2005
Messages
5,322
Depends on crankshaft or prop horsepower. Horsepower is a great number, something most folks can relate to, however the number a boat operator should be interested is torque. That's what gets a boat up, out of the water and on step. Horsepower keeps the boat (planing hull) up and maneuverable.

Most, if not all surf/wake boat engines these days are rated by torque. Getting an additional 1500-4000 lb of water in a displacement hull moving is a tall order
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
0K142149 is the
transom assy serial number not the engine serial number.

The drive ratio should be stamped on the side of the upper housing. You'll also find the drive serial number there. Post that here and we can tell you what the ratio is. It should be 1.5:1 or 1.47:1.


Chris.....
 
Last edited:

Beretta1

Cadet
Joined
Jun 12, 2021
Messages
19
transom assy serial number not the engine serial number.

The drive ratio should be stamped on the side of the upper housing. You'll also find the drive serial number there. Post that here and we can tell you what the ratio is. It should be 1.5:1 or 1.47:1.


Chris.....
That serial #is right under the Mercruiser logo where the transom assembly is bolted to the transom. It’s not the engine. Thanks
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
That serial #is right under the Mercruiser logo where the transom assembly is bolted to the transom. It’s not the engine. Thanks
To detrmine what engine you have, we need the engine serial number.
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
70,958
Anyone know the horse power of a ‘97 5.7 V8 Thunderbolt ? OK142149 is the serial #. Also where do I find the gear ratio ? Just purchased a 1997 Bayliner Capri 2052 LS with this engine.
Ayuh,.... Welcome Aboard,..... 2bbl. carb,..?? 4bbl. carb,..?? Efi,..?? Mpi,..??
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,574
1997 should be a vortec motor (8 intake bolts)

Motor will be prop rated.

As Bondo asked, what induction system?
 

Rick Stephens

Admiral
Joined
Aug 13, 2013
Messages
6,118
Sorry, Don’t know.

New to you boat means time to go through and do all maintenance items that the previous 'bored with his boat' owner neglected for the last 10 years. In that process you will be pulling the flash arrestor off and seeing what carburetor you have. Don't skip on doing bow to stern inspection and maintenance or it will end up costing you mucho big $$ to to fix that little odd or end that fails.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,574
Agree. Time to pull the drive and do a complete drive maintenance, check u-joints, bellows and alignment. Do a compression test. All cylinders should be between 140 and 150 psi

Do your engine oil service, ignition service and other boat side service.

Do a trailer brake service, bearing service and general inspection.

Your serial number comes back as 2 barrel or 4 barrel carb

If 2 barrel, 230hp (closer to 240) if 4 barrel 260hp (closer to 275hp)
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
Engine SN- 0K147527
Transom SN- 0K142149
Drive SN- 0K047735
Engine:
Model: 457B100KT
1997 Non-Vortec, '5.7L' 2 bbl carb, Thunderbolt V, serpentine belt.
235hp (Propshaft)

Drive:
Model: 5010147KS
1997 Alpha One Gen II, 1.47:1 ratio

Chris......
 

dubs283

Vice Admiral
Joined
Jul 27, 2005
Messages
5,322
Gonna guess 4600-4800

I shoot for 4500 most models but some push it up a bit for spec.

It should note to the operator on the engine tag, most likely sticker on the rain hat for max wot range
 
Top