indianriverbound
Cadet
- Joined
- Feb 19, 2013
- Messages
- 10
Got a 2017 40 4 stroke on a 13' Whaler, hit a sand bar...rather hard. Since then the engine has spit and sputtered at anything over 300 yards running at greater than 3500 rpm. I can run 3000 rpm or less no problem. Figured maybe the engine was clogged with sand so I removed the thermostat and cover and flushed the engine good. Amount of sand that came out was alot. Flushed for about 20 minutes till clear. Waterpump is pumping like mad. Water coming out of prop is warm, telltale is cold off of muffs. Replaced therm and fuel filter...fuel bowel will start full but drains down to 25% or less when running.....can't tell if it is a sand clog problem or a fuel problem.......but I had no problem untill I hit that sandbar.....any ideas would be appreciated.