just removed all the batteries in the boat due to cleaning. when putting them back in, realized there are two starting batteries and one deep cycle. Have alumaweld 17 ft with 115 1996 mecury outboard. boat has trolling motor, console with guages, and livewell. put all the battery connections back in and starter turns, but would not engage flywheel. other threads have suggested weak battery or poor connections. battery was working fine when i took it out and connections were tight. wiring harness had two black wires that went directily to starter and two sets of large wires (one set of each red and black) that went forward to console. tried putting all of the wires on the starting battery--starter turned shortly and then stopped--now whole boat is dead--no juice to anything--no power trim, no console, no starter. Have checked all the fuses I can find and they all seem good. Is it possible i fried the ignition switch at the key with the cranking amps and that has the whole boat dead?