Lowrance Transducer Cracked

[FluffyChicken]

Unfortunately the boat came cracked like this. Bracket is also snapped a bit needs replaced. Is this outer cracked shell just a shell and the unit inside is sealed? It was definitely working last time I used it just curious if it should be replaced??

Thanks

 

[dingbat]

View attachment 398089View attachment 398090Unfortunately the boat came cracked like this. Bracket is also snapped a bit needs replaced. Is this outer cracked shell just a shell and the unit inside is sealed? It was definitely working last time I used it just curious if it should be replaced??

Thanks

It’s shell in shell construction but once compromised the end is near..

 

[FluffyChicken]

It’s shell in shell construction but once compromised the end is near..

Could I use my plastic welder and or melting tip on plastic stapler and close the gap? Or will this throw off the accuracy of the sonar?

 

[FLATHEAD]

Could I use my plastic welder and or melting tip on plastic stapler and close the gap? Or will this throw off the accuracy of the sonar?

Only one way to find out!

 

[dingbat]

Could I use my plastic welder and or melting tip on plastic stapler and close the gap? Or will this throw off the accuracy of the sonar?

Sonar transducers are not "accurate", per say. Far too many variables come in play for any type of accuracy spec.

Sonar transducer are primarily designed and rated for their ability (sensitivity) to detect the minute differences in density. This ability enables them to detect and "paint a picture" of the objects in the water column below......aka fish finder. Unless you do a side by side comparison with a known good unit, you'll have no idea if, or how badly, the unit is compromised.

I suspect the transducer is toast performance wise, but if all your looking for is a depth, it may suffice your needs.....for a while.

 

[dubs283]

Only one way to find out!

Expect to be buying a new transducer but I second this

 

[FluffyChicken]

Expect to be buying a new transducer but I second this

K. Going to send it!

 

[FluffyChicken]

Sonar transducers are not "accurate", per say. Far too many variables come in play for any type of accuracy spec.

Sonar transducer are primarily designed and rated for their ability (sensitivity) to detect the minute differences in density. This ability enables them to detect and "paint a picture" of the objects in the water column below......aka fish finder. Unless you do a side by side comparison with a known good unit, you'll have no idea if, or how badly, the unit is compromised.

I suspect the transducer is toast performance wise, but if all your looking for is a depth, it may suffice your needs.....for a while.

Thank you