FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I have a 1977 Chrysler 55 HP, magna power 2, with low compression in one of my cylinders. How can I tell if it is a ring problem or a blown head gasket or possible something else?
Add a squirt of TCW-3 (grade outboard motor oil) and see if the compression improves. If its a stuck ring the TCW-3 will work it loose and an improvement in compression will occur. If it doesn't improve it could be a head gasket or "something else".
Simply pull the head and inspect the gasket, cylinder, and piston for damage. If the piston and cylinder look good you can pull the port cover on the side of the motor to inspect a little further. If the gasket is good, cylinder looks good, piston has no visible damage, then you may have stuck rings. If this is the case, remove the piston and carefully free the rings. Clean it up and re-install, check compression again.
