Looking for any suggestions

[cyclops222]

Has the TP sensor been checked for tightness ? Disconnect and reconnect the sensor connection a couple of times to rub off any corrosion ?

 

[Berkley1]

Has the TP sensor been checked for tightness ? Disconnect and reconnect the sensor connection a couple of times to rub off any corrosion ?

Brand new with new pigtail

 

[Bt Doctur]

next step is to hook up a remote tank (6 gal outboard type) to eliminate the tank and venting. Next is remove the fuel pickup tube from the tank and verify that there is no screen INSIDE the tube

 

[Berkley1]

next step is to hook up a remote tank (6 gal outboard type) to eliminate the tank and venting. Next is remove the fuel pickup tube from the tank and verify that there is no screen INSIDE the tube

Well eliminated the fuel tank as an issue now I can start the engine only if I open the throttle once it starts I can adjust back to idle and it runs fine if I shut it down I have throttle up to start. Stumped at this point