Kill switch removal

Kenhackett35

Recruit
Joined
Oct 24, 2020
Messages
2
I HAVE A ETC 225HO. ON A KENNER CENTER CONSOLE. I WOULD LIKE TO GET RID OF THE KILL SWITCH IN THE IGNITION. WHAT WIRES DO I JUMP.
 

Attachments

  • 20201024_165725.jpg
    20201024_165725.jpg
    1.3 MB · Views: 5

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
40,582
Not an OB expert but the ETC I believe is a 2 stroke
If it is, then the kill switch grounds the Black/Yellow wire to the Black wire

wired like this

Johnson Evinrude wiring.jpg
 

Chris1956

Supreme Mariner
Joined
Mar 25, 2004
Messages
27,036
Kill switches only have 2 wires. You have more. OEM Johnson OB ign switches will accept a kill lanyard, but will also work fine without one. On those, when the lanyard is pulled, the ign switch is physically turned CCW to the off position.

I cannot see if that is what you have, but it looks similar.
 
Top