Re: Johnson 90 will not go over 2200 rpm at wot in the water after complete overhaul
Sorry for bringing back to life an otherwise dead thread, but I just wanted to say THANK YOU to Daselbee. I had a very similar issue as described above after doing some service on the engine. I couldve _sworn_ I had marked cyls #2 and #4 properly but I mustve somehow switched them. I have been pulling my hair out for days wondering WHY my engine is backfiring intermittently. I marked my fly wheel and found #2 and #4 were firing at the wrong time. Swapped them over and VOILA, all is working as it should!!! Thanks very VERY much!!
Sorry for bringing back to life an otherwise dead thread, but I just wanted to say THANK YOU to Daselbee. I had a very similar issue as described above after doing some service on the engine. I couldve _sworn_ I had marked cyls #2 and #4 properly but I mustve somehow switched them. I have been pulling my hair out for days wondering WHY my engine is backfiring intermittently. I marked my fly wheel and found #2 and #4 were firing at the wrong time. Swapped them over and VOILA, all is working as it should!!! Thanks very VERY much!!