Instrument wiring for old evinrude

Env.Eng

Recruit
Thread starter
Joined
Sep 5, 2012
Messages
1
I have acquired an old (circa 1990) 70 HP evinrude on a 15 ft halfcbin
Behind the dash is a wiring mess, and in amongst it is a Half sphere made of rubber, with a bakelite face on it.
It is about 20 mm in diameter, and has 6 wires coming out of it.
3 of them go to the tachometer (red, black and blue) and I have no idea where the other 3 are or were supposed to go.
Can anyone tell me what this 1/2 sphere is and if I need it, and how I connect up the tachometer.
 
Joined
Feb 17, 2012
Messages
2,906
Re: Instrument wiring for old evinrude

welcome to the forum

under the dash red should be 12v+
black should be 12v -
blue should be dash lights bulbs
grey should be signal for the tach

if you can get a picture of what you have including the 1/2 sphere and the throttle/shift control box that would realy help.

http://forums.iboats.com/showthread.php?t=225399 the diagrams supplyed by silvertips in the sticky section (link provided) may also help you
 
Top